TSG Fly Graphic Design Gum Red Κράνος
TSG Fly Graphic Design Gum Red Κράνος
SKU: 675639055
PROTECTION
IN-MOLD CONSTRUCTION
In-Mold Construction is a technique that connects the shock absorbing EPS liner directly to the polycarbonate shells to create a lightweight and strong structure. In the first step, the flat PC sheet is heated and deep-drawn over the helmet mold. Then the outline of the helmet shell and the holes are milled out. This PC shell is then placed in the helmet mold and the anchors for straps and fitting systems are placed. Then the mold will be closed, and the EPS is injected. Now the polycarbonate shell bonds with the EPS and a super light, yet extremely stable helmet is created.
EN 1077 B
ASTM 2040
US-American snow sports helmet standard
FIT
TUNED FIT SYSTEM
Our Tuned Fit System allows a rider to dial in their fit using different thickness pads on the interior of the helmet. Our helmets always come with two sizes of pads. Each size comes in a different color which makes it easy to determine the right pads to fit the helmet to the head. It is very important to adjust the helmet with these included pads. For example, if necessary, the slightly thicker pads can be mounted on the back of the head and the pad for the front of the head can be thinner, or vice versa.
SNUG FIT
We design our helmets differently from our competitors. We have analyzed the most diverse heads and determined a basic anatomical shape. This allows us to follow exactly the curves of the human head shape. You can see this very well when you look at a TSG helmet from the front: The sides of the helmet shell have more curvature and go clearly inwards. The outline of the TSG helmets at the sides and at the back is round and not straight down like with other helmets. With this production we achieve a so-called contact ring inside the helmet. Here the head touches the helmet all around.
We call this the TSG Snug Fit. Beside the better fit, our helmets with Snug Fit also look less bulky.
In order to lift the TSG helmet from the head, more power is needed than with competition models. This is important so that the helmet does not slip during use and above all remains in the correct position even in the event of a fall.
LOW FIT
A helmet can only protect what it covers. Our Low Fit design sits low and fully protects the entire back and sides of your head without impairing field of vision or restricting movement.
COMFORT
COLD APPROVED
4 VENTS WITH AIR FLOW CHANNELS
COATED FRONT RIM
A protective layer of PC is bonded to the front foam for a clean look and additional strength in the helmet’s bottom rim.
COMFORT PADDING IN 2 SIZES
Premium heat-sealed padding that is pre-formed and quick-drying: Removable and machine (hand) washable.
REMOVABLE SOFT EAR PADS AND NECKROLL
Soft ear pads with comfortable neckroll that simply attach with velcro to your helmet. Your ear pads add warmth to enhance comfort and easily convert for multi-season use.
GOGGLE LOCK
| USE IT FOR: | SKI/SNOWBOARD |
| CERTIFICATION: | NF EN 1077 12/2007 B, ASTM 2040 |
| WEIGHT: | 350 G |
| MATERIAL: | POLYCARBONATE, EPS, POLYESTER, NYLON |
| HELMET | S/M | L/XL | |
| HEAD CIRCUMFERENCE | 54-56 CM | 57-59 CM | |
Δωρεάν αποστολές για παραγγελίες άνω των 40€ (Για την Ελλάδα)
Επιστροφές εώς 15 εργάσιμες ημέρες από την παραλαβή.
PROTECTION
IN-MOLD CONSTRUCTION
In-Mold Construction is a technique that connects the shock absorbing EPS liner directly to the polycarbonate shells to create a lightweight and strong structure. In the first step, the flat PC sheet is heated and deep-drawn over the helmet mold. Then the outline of the helmet shell and the holes are milled out. This PC shell is then placed in the helmet mold and the anchors for straps and fitting systems are placed. Then the mold will be closed, and the EPS is injected. Now the polycarbonate shell bonds with the EPS and a super light, yet extremely stable helmet is created.
EN 1077 B
ASTM 2040
US-American snow sports helmet standard
FIT
TUNED FIT SYSTEM
Our Tuned Fit System allows a rider to dial in their fit using different thickness pads on the interior of the helmet. Our helmets always come with two sizes of pads. Each size comes in a different color which makes it easy to determine the right pads to fit the helmet to the head. It is very important to adjust the helmet with these included pads. For example, if necessary, the slightly thicker pads can be mounted on the back of the head and the pad for the front of the head can be thinner, or vice versa.
SNUG FIT
We design our helmets differently from our competitors. We have analyzed the most diverse heads and determined a basic anatomical shape. This allows us to follow exactly the curves of the human head shape. You can see this very well when you look at a TSG helmet from the front: The sides of the helmet shell have more curvature and go clearly inwards. The outline of the TSG helmets at the sides and at the back is round and not straight down like with other helmets. With this production we achieve a so-called contact ring inside the helmet. Here the head touches the helmet all around.
We call this the TSG Snug Fit. Beside the better fit, our helmets with Snug Fit also look less bulky.
In order to lift the TSG helmet from the head, more power is needed than with competition models. This is important so that the helmet does not slip during use and above all remains in the correct position even in the event of a fall.
LOW FIT
A helmet can only protect what it covers. Our Low Fit design sits low and fully protects the entire back and sides of your head without impairing field of vision or restricting movement.
COMFORT
COLD APPROVED
4 VENTS WITH AIR FLOW CHANNELS
COATED FRONT RIM
A protective layer of PC is bonded to the front foam for a clean look and additional strength in the helmet’s bottom rim.
COMFORT PADDING IN 2 SIZES
Premium heat-sealed padding that is pre-formed and quick-drying: Removable and machine (hand) washable.
REMOVABLE SOFT EAR PADS AND NECKROLL
Soft ear pads with comfortable neckroll that simply attach with velcro to your helmet. Your ear pads add warmth to enhance comfort and easily convert for multi-season use.
GOGGLE LOCK
| USE IT FOR: | SKI/SNOWBOARD |
| CERTIFICATION: | NF EN 1077 12/2007 B, ASTM 2040 |
| WEIGHT: | 350 G |
| MATERIAL: | POLYCARBONATE, EPS, POLYESTER, NYLON |
| HELMET | S/M | L/XL | |
| HEAD CIRCUMFERENCE | 54-56 CM | 57-59 CM | |
Δωρεάν αποστολές για παραγγελίες άνω των 40€ (Για την Ελλάδα)
Επιστροφές εώς 15 εργάσιμες ημέρες από την παραλαβή.
