Jones Stratos Wide Ανδρικό Snowboard

The modern all-mountain ripper

Ideal for all-conditions freeriding, freestyle and carving

The Stratos is a hybrid all-mountain board built with the body of a directional freeride board and the spirit of a freestyle board. The Stratos has a playful board feel thanks to a narrow sidecut and friendly flex, but the 10mm of taper and 3D Contour Base 3.0 give it the float and turn performance of a pow board.

Directional Rocker

A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

"My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder the nose gets caught under a weird crust and tosses you or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls." - Jeremy Jones

Shape Tech

1. Traction Tech 3.0
Traction Tech 3.0 features three bumps per edge (front binding board center back binding). The middle bump is slightly bigger than the outside bumps for better grip.

2. Progressive sidecut
At the far ends of the sidecut the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Tapered shape 10 mm
The tapered shape sinks the tail in pow for better float and quicker turns.

Blunt nose
How a board glides in powder crust corn or any snow more than an inch deep is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones

Directional Flex Pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose center of board and tail are slightly different stiffnesses to help lift the nose sink the tail and improve stability at speed.

Directional Flex Pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose center of board and tail are slightly different stiffnesses to help lift the nose sink the tail and improve stability at speed.

3D Contour Base 3.0

Built with the finest tech and materials

100% of our adult models feature high-end materials construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.

Base

Sintered 9900 Base

Made from Ultra-High Molecular Weight ­Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.

Flip-Flop Base

Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.

Wend Natural Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Insert Pack

Float Pack New

Allows super setback stance for deep pow days.

Other Features

Forever Flex New

Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Power Basalt stringers

Sustainable strength. Basalt stringers are made with 100% natural fibers and help transfer power to the edges improve torsional response and absorb board chatter.

Bio Resin

Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organicc raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.

Oversized Recycled Edges

All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Factory Tuned

All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Reinforcements

Power sustainable basalt stringers

The ultimate balance of weight and power. Ultra series models are built with speed boosting chatter sucking premium materials compared to standard models.

Topsheet

Textured Eco-plastic topsheet

Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Woodcore

Ultra Core

Dual-density premium wood core made of mostly paulownia with specially positioned poplar stringers for better durability and turn power.

Sizing Details

Choose your ideal board size range using your body weight and boot size.To decide between two sizes choose the smaller size if your priority is maneuverability and freestyle performance choose the larger size if you're focused on riding fast and powder performance. A shorter board will be easier to turn and a longer board will offer better float and stability riding off-piste.

Men's Stratos Wide Snowboard Specifications

High performance sustainably made gear.
We design gear that balances performance durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2023 all our snowboards and splitboards are molded with Super Sap Bio-Resin.

Proud member of 1% For The Planet we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.

Eco-Performance
We never sacrifice performance and durability for sustainability.
We strive to make products with the least impact on the planet possible but we trust our lives to our gear so we must value performance foremost. We test new materials and production processes to make sure we never sacrifice performance or durability just to make a product more sustainable. Durability is a critical aspect of sustainability as the longer the gear lasts the less waste that goes to the dump. This ECO-Performance design philosophy is the foundation upon which everything we make is made.

Sustainability
We strive to minimize the impact of our gear.
To make gear in the most responsible way possible we strive to minimize the impact of our materials and manufacturing processes however we can. All of our snowboards splitboards and outerwear are partially if not completely made with recycled materials and they always have been. Our boards are also made in a factory that runs on 100% solar power and the fabrics we use in our outerwear are Oeko-Tex and/or Bluesign® certified - the two leading responsible material certifications in the apparel industry.

Innovation
We aspire to do things differently.
From our groundbreaking board shapes to our trailblazing outerwear designs we never settle for anything less than game changing gear performance. By keeping an open mind to new gear concepts materials and production processes we aspire to do things differently and make innovative gear and outerwear that blends comfort durability and industry leading responsible manufacturing practices with standard setting performance.

Δωρεάν αποστολές για παραγγελίες άνω των 40€ (Για την Ελλάδα)

Επιστροφές εώς 15 εργάσιμες ημέρες από την παραλαβή.