Jones Mountain Twin Wide Ανδρικό Splitboard
Jones Mountain Twin Wide Ανδρικό Splitboard
SKU: 403033018
The backcountry twin
Ideal for backcountry touring and freestyle
The Mountain Twin Split offers creative splitboarders a premium directional twin shape option for getting rad in the backcountry. It’s designed to offer precision control riding regular or switch on any terrain, from chutes to tree runs to backcountry booters.
Art by: RP Roberts
Camrock
A unique rocker/camber flex pattern defined by evenly balanced tip and tail rocker and camber between the bindings. Camrock improves freestyle finesse by keeping your tips playful while maintaining the power and pop of camber underfoot.
Shape Tech
1. Inside & outside Traction Tech 3.0
Traction Tech 3.0 features three bumps per edge (front binding board center back binding). The middle bump is slightly bigger than the outside bumps for better grip.
Inner edge Traction Tech
Inner edge Traction Tech improves splitboard edge grip on ascent. Three sidecut bumps on each side of your binding keep your locked in on icy skin tracks no matter which way you are traversing.
2. Progressive sidecut
At the far ends of the sidecut the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
3. Quick Tension Tail Clip
Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.
4. Boltless Bridge
The Boltless Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.
Twin flex pattern
Balanced flex pattern with equal stiffness and torsional response in the nose and tail.
Blunt nose
How a board glides in powder crust corn or any snow more than an inch deep is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones
3D Contour Base 2.0
Moderate 3D-base contours featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.
About 3D Contour Bases
3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.
Built with the finest tech and materials
100% of our adult models feature high-end materials construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.
Base : Sintered 8000 Base
New super durable material made from Ultra High Molecular Weight Polyethylene (UHMW-PE) and carbon. Base is easily repairable highly wax absorbent and wicked fast.
Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.
Flip-Flop Base
Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.
Extra hardware : Karakoram Ultra Clips
Ultra clips are the strongest lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.
Fiber : Biax fiberglass
A dual-direction dual-layer stitched fiberglass laminate that provides a fun forgiving and snappy ride.
Other features
Bio Resin
Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.
Oversized recycled edges
All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.
Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
Forever Flex
Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.
Recycled rounded ABS
Rounded sidewall finish that improves board durability by protecting topsheet from chipping.
Stainless steel reinforcement
Stainless steel plates are embedded into the nose and tail for improved board tip durability.
Topsheet : Eco-plastic topsheet
Bio-plastic topsheet made from Castor beans. This eco-material is ultralight chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).
Woodcore : Control Split Core
Dual-density full premium wood core featuring a 2:1 paulownia to poplar stringer ratio that keeps core light but ultra damp.
Sizing Details
Choose your ideal board size range using your body weight and boot size.
To decide between two sizes choose the smaller size if your priority is maneuverability and freestyle performance choose the larger size if you're focused on riding fast and powder performance. A shorter board will be easier to turn and a longer board will offer better float and stability riding off-piste.
| Board Size (cm) | 159 wide |
| Weight Range (lbs/kg) | 150-200 lbs. / 67-91 kg. |
| Ideal Boot Size (US/EUR) | 10-12 US / 43.5-46 |
| Big Horn Series * | x |
| Board Waist Width (cm) | 26.1 |
| Bindings Recommended Size | - |
| Skins Group | D |
*If you wear US Men’s 11.5 or bigger look for our Big Horn Series boards with minimum waist width 26.3 cm.
Men's Mountain Twin Splitboard Specifications
| Board Size (cm) | 159 wide |
| Board Weight | 3.1kg / 6.83lbs |
| Contact Length (cm) | 113 |
| Effective Edge Length (cm) | 123 |
| Tip Length (cm) | 23.5 |
| Tail Length (cm) | 22.5 |
| Waist Width (cm) | 26.1 |
| Tip Width (cm) | 30.4 |
| Tail Width (cm) | 30.4 |
| Sidecut (m) | 7.9 |
| Taper (cm) | 0 |
| Reference Stance (cm) | 60 |
| Centered Stance (cm) | 58 |
| Insert Pack | Splitboard Pack |
| Stance Setback (cm) | 0 |
High performance sustainably made gear.
We design gear that balances performance durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2023 all our snowboards and splitboards are molded with Super Sap Bio-Resin.
Proud member of 1% For The Planet we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.
Eco-Performance
We never sacrifice performance and durability for sustainability.
We strive to make products with the least impact on the planet possible but we trust our lives to our gear so we must value performance foremost. We test new materials and production processes to make sure we never sacrifice performance or durability just to make a product more sustainable. Durability is a critical aspect of sustainability as the longer the gear lasts the less waste that goes to the dump. This ECO-Performance design philosophy is the foundation upon which everything we make is made.
Sustainability
We strive to minimize the impact of our gear.
To make gear in the most responsible way possible we strive to minimize the impact of our materials and manufacturing processes however we can. All of our snowboards splitboards and outerwear are partially if not completely made with recycled materials and they always have been. Our boards are also made in a factory that runs on 100% solar power and the fabrics we use in our outerwear are Oeko-Tex and/or Bluesign® certified - the two leading responsible material certifications in the apparel industry.
Innovation
We aspire to do things differently.
From our groundbreaking board shapes to our trailblazing outerwear designs we never settle for anything less than game changing gear performance. By keeping an open mind to new gear concepts materials and production processes we aspire to do things differently and make innovative gear and outerwear that blends comfort durability and industry leading responsible manufacturing practices with standard setting performance.
Δωρεάν αποστολές για παραγγελίες άνω των 40€ (Για την Ελλάδα)
Επιστροφές εώς 15 εργάσιμες ημέρες από την παραλαβή.
The backcountry twin
Ideal for backcountry touring and freestyle
The Mountain Twin Split offers creative splitboarders a premium directional twin shape option for getting rad in the backcountry. It’s designed to offer precision control riding regular or switch on any terrain, from chutes to tree runs to backcountry booters.
Art by: RP Roberts
Camrock
A unique rocker/camber flex pattern defined by evenly balanced tip and tail rocker and camber between the bindings. Camrock improves freestyle finesse by keeping your tips playful while maintaining the power and pop of camber underfoot.
Shape Tech
1. Inside & outside Traction Tech 3.0
Traction Tech 3.0 features three bumps per edge (front binding board center back binding). The middle bump is slightly bigger than the outside bumps for better grip.
Inner edge Traction Tech
Inner edge Traction Tech improves splitboard edge grip on ascent. Three sidecut bumps on each side of your binding keep your locked in on icy skin tracks no matter which way you are traversing.
2. Progressive sidecut
At the far ends of the sidecut the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
3. Quick Tension Tail Clip
Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.
4. Boltless Bridge
The Boltless Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.
Twin flex pattern
Balanced flex pattern with equal stiffness and torsional response in the nose and tail.
Blunt nose
How a board glides in powder crust corn or any snow more than an inch deep is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones
3D Contour Base 2.0
Moderate 3D-base contours featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.
About 3D Contour Bases
3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.
Built with the finest tech and materials
100% of our adult models feature high-end materials construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.
Base : Sintered 8000 Base
New super durable material made from Ultra High Molecular Weight Polyethylene (UHMW-PE) and carbon. Base is easily repairable highly wax absorbent and wicked fast.
Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.
Flip-Flop Base
Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.
Extra hardware : Karakoram Ultra Clips
Ultra clips are the strongest lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.
Fiber : Biax fiberglass
A dual-direction dual-layer stitched fiberglass laminate that provides a fun forgiving and snappy ride.
Other features
Bio Resin
Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.
Oversized recycled edges
All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.
Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
Forever Flex
Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.
Recycled rounded ABS
Rounded sidewall finish that improves board durability by protecting topsheet from chipping.
Stainless steel reinforcement
Stainless steel plates are embedded into the nose and tail for improved board tip durability.
Topsheet : Eco-plastic topsheet
Bio-plastic topsheet made from Castor beans. This eco-material is ultralight chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).
Woodcore : Control Split Core
Dual-density full premium wood core featuring a 2:1 paulownia to poplar stringer ratio that keeps core light but ultra damp.
Sizing Details
Choose your ideal board size range using your body weight and boot size.
To decide between two sizes choose the smaller size if your priority is maneuverability and freestyle performance choose the larger size if you're focused on riding fast and powder performance. A shorter board will be easier to turn and a longer board will offer better float and stability riding off-piste.
| Board Size (cm) | 159 wide |
| Weight Range (lbs/kg) | 150-200 lbs. / 67-91 kg. |
| Ideal Boot Size (US/EUR) | 10-12 US / 43.5-46 |
| Big Horn Series * | x |
| Board Waist Width (cm) | 26.1 |
| Bindings Recommended Size | - |
| Skins Group | D |
*If you wear US Men’s 11.5 or bigger look for our Big Horn Series boards with minimum waist width 26.3 cm.
Men's Mountain Twin Splitboard Specifications
| Board Size (cm) | 159 wide |
| Board Weight | 3.1kg / 6.83lbs |
| Contact Length (cm) | 113 |
| Effective Edge Length (cm) | 123 |
| Tip Length (cm) | 23.5 |
| Tail Length (cm) | 22.5 |
| Waist Width (cm) | 26.1 |
| Tip Width (cm) | 30.4 |
| Tail Width (cm) | 30.4 |
| Sidecut (m) | 7.9 |
| Taper (cm) | 0 |
| Reference Stance (cm) | 60 |
| Centered Stance (cm) | 58 |
| Insert Pack | Splitboard Pack |
| Stance Setback (cm) | 0 |
High performance sustainably made gear.
We design gear that balances performance durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2023 all our snowboards and splitboards are molded with Super Sap Bio-Resin.
Proud member of 1% For The Planet we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.
Eco-Performance
We never sacrifice performance and durability for sustainability.
We strive to make products with the least impact on the planet possible but we trust our lives to our gear so we must value performance foremost. We test new materials and production processes to make sure we never sacrifice performance or durability just to make a product more sustainable. Durability is a critical aspect of sustainability as the longer the gear lasts the less waste that goes to the dump. This ECO-Performance design philosophy is the foundation upon which everything we make is made.
Sustainability
We strive to minimize the impact of our gear.
To make gear in the most responsible way possible we strive to minimize the impact of our materials and manufacturing processes however we can. All of our snowboards splitboards and outerwear are partially if not completely made with recycled materials and they always have been. Our boards are also made in a factory that runs on 100% solar power and the fabrics we use in our outerwear are Oeko-Tex and/or Bluesign® certified - the two leading responsible material certifications in the apparel industry.
Innovation
We aspire to do things differently.
From our groundbreaking board shapes to our trailblazing outerwear designs we never settle for anything less than game changing gear performance. By keeping an open mind to new gear concepts materials and production processes we aspire to do things differently and make innovative gear and outerwear that blends comfort durability and industry leading responsible manufacturing practices with standard setting performance.
Δωρεάν αποστολές για παραγγελίες άνω των 40€ (Για την Ελλάδα)
Επιστροφές εώς 15 εργάσιμες ημέρες από την παραλαβή.
