Jones Stratos 2023 Limited Edition Men's Splitboard

The energetic, ride anything splitboard

Ideal for all-terrain touring and backcountry freestyle

The new Stratos splitboard is an all-conditions, all-terrain splitboard built for ripping turns, slashing gullies and boosting airs in the backcountry.

A directional freeride shape blended with the board feel of a freestyle stick give the Stratos Split a remarkable energy on snow. The Stratos Split’s energetic board feel is thanks to a narrow sidecut, friendly flex and camber heavy directional rocker profile, while 10mm of taper and a 3D Contour Base 3.0 keep the Stratos Split super quick edge-to-edge. For added response, the Stratos Split is built with our premium Ultra core, Flax/Basalt Power stringers and an ECO-plastic topsheet. For added edge grip and torsional board lock, the Stratos Split features Inner/Outer Traction Tech 3.0, the Boltless Bridge, and Karakoram Ultra Clips 2.0. Nimble and confident in any terrain, the Stratos Split makes you want to slice and dice your way down a run the most fun way possible.

Profile

Directional Rocker

A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

"My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls." - Jeremy Jones

Shape Tech

1. Traction Tech 3.0
Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

2. Progressive sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Tapered shape, 10 mm
The tapered shape sinks the tail in pow for better float and quicker turns.

Blunt nose
How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones

Directional Flex Pattern
Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.

V-Core
Jones exclusive wood core profiling that offers a stable and playful board feel. The wood core is softer between the feet for easy turn initiation and stiffer in the nose and tail for stability riding through uneven terrain and landing airs.

3D Contour Base 3.0

Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.

Built with the finest tech and materials

100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.

Base
Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Sintered 9900 Base
Made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.

Extra hardware
Karakoram Ultra Clips 2.0 with Tip-Lock
Redesigned Karakoram Ultra Clips 2.0 are lighter weight, clamp tighter and have a smaller footprint than the original Ultra Clip. They are also adjustable so you can maintain even compression as your splitboard ages.

Fiber
Biax fiberglass
A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Other features


Forever Flex
Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Recycled rounded ABS
Rounded sidewall finish that improves board durability by protecting topsheet from chipping.

Stainless steel reinforcement
Stainless steel plates are embedded into the nose and tail for improved board tip durability.

Outer oversized recycled edges
Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm, inside edges are 1.5mm.

Inner thin recycled edges
Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm, inside edges are 1.5mm.

Reinforcements

Sustainable Flax/Basalt Power stringers
Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to eliminate nose and tail chatter.

Topsheet
Textured Eco-plastic topsheet
Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Woodcore
Ultra Split Core
Dual density premium wood core made of mostly paulownia with specially positioned poplar stringers for better durability and turn power.

Sizing Details

Choose your ideal board size range using your body weight and boot size.To decide between two sizes, choose the smaller size if your priority is maneuverability and freestyle performance, choose the larger size if you're focused on riding fast and powder performance. A shorter board will be easier to turn and a longer board will offer better float and stability riding off-piste.

*If you wear US Men’s 11.5 or bigger, look for our Big Horn Series boards with minimum waist width 26.3 cm. 

Men's Stratos Splitboard Specifications

High performance sustainably made gear.
We design gear that balances performance durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2023 all our snowboards and splitboards are molded with Super Sap Bio-Resin.

Proud member of 1% For The Planet we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.

Eco-Performance
We never sacrifice performance and durability for sustainability.
We strive to make products with the least impact on the planet possible but we trust our lives to our gear so we must value performance foremost. We test new materials and production processes to make sure we never sacrifice performance or durability just to make a product more sustainable. Durability is a critical aspect of sustainability as the longer the gear lasts the less waste that goes to the dump. This ECO-Performance design philosophy is the foundation upon which everything we make is made.

Sustainability
We strive to minimize the impact of our gear.
To make gear in the most responsible way possible we strive to minimize the impact of our materials and manufacturing processes however we can. All of our snowboards splitboards and outerwear are partially if not completely made with recycled materials and they always have been. Our boards are also made in a factory that runs on 100% solar power and the fabrics we use in our outerwear are Oeko-Tex and/or Bluesign® certified - the two leading responsible material certifications in the apparel industry.

Innovation
We aspire to do things differently.
From our groundbreaking board shapes to our trailblazing outerwear designs we never settle for anything less than game changing gear performance. By keeping an open mind to new gear concepts materials and production processes we aspire to do things differently and make innovative gear and outerwear that blends comfort durability and industry leading responsible manufacturing practices with standard setting performance.

Free shipping cost for orders above 40€ (For Greece)

Returns within 15 working days from the date of delivery.